Sigrity SI 高速序列信號系統的建模，模擬與分析課程
課程名稱： 高速序列信號系統的建模，模擬與分析
Systems Modeling, Simulation, and Analysis of Serial-Link
天 數：1天
課程大綱：
- Identify SystemSI-SLA tool and its primary advantages.
認明SystemSI-SLA的工具與主要優勢
- Identify channel anysis process used in the SystemSI-SLA tool for the serial link systems.
認明SystemSI-SLA的分析流程
- Build a block-level topology of a simple serial link system (SSLS) in SystemSI-SLA.
在SystemSI-SLA建立方塊層級的簡單拓樸
- Set channel analysis options for the SSLS.
對序列系統設定分析選擇
- Simulate SSLS, considering jitter in transmitter and receiver, increasing data rate, etc.
模擬序列信號，考慮抖動，資料傳輸率的增加
-
Generate report and results. Analyze simulation results in terms of 2D waveforms, such as EYE contour,BER EYE, Bathtub plots, impulse response of the channel etc.
產生模擬結果與分析報告，包括2D波形，眼圖，誤碼率，浴缸曲線，脈衝反應。
- Modify the SSLS by adding AMI models to transmitter and receiver.
加入AMI模型來改善序列信號系統
-
Simulate the modified SSLS, considering several cases of varying AMI parameters of the transmitter and receiver.
用不同的AMI參數來執行序列信號系統模擬
-
Generate simulation based reports and results for each cases. Analyze and compare simulation results of several cases.
產生模擬報告與分析比較的結果
- Next, modify the SSLS by using IBIS-AMI models for transmitter and receiver blocks.
用IBIS-AMI來改善序列信號系統
- Simulate the modified SSLS, sweeping transmitter IO parameters, AMI parameters etc.
用不同的傳輸參數與AMI參數來掃描模擬序列信號系統
- Generate simulation based reports and results for each cases. Analyze and compare simulation results.
產生模擬報告與分析比較的結果
-
Use the built-in template of the serial link system model for crosstalk simulations, and analysis to explore crosstalk effects of the coupled serial links channels on the primary serial link.
用既成的序列信號系統模板來模擬分析串擾的效應
- TopXp-SLA PCIE4 Compliance Simulation:
用TopXp-SLA對 PCIE4做合規式模擬
- TopXp-SLA PCIE5 Compliance Simulation:
用TopXp-SLA對 PCIE5做合規式模擬
